FocalFit › Astrophotography image scale and camera field calculator
Astrophotography image scale and camera field calculator
Image scale (″/pixel) = 206.265 × pixel size in µm ÷ focal length in mm. A 3.76 µm sensor on a 1,000 mm telescope samples about 0.78″ per pixel; its 6,248-pixel-wide sensor covers about 1.35° of sky. For deep-sky work in ordinary seeing, aim for roughly 0.7–2″ per pixel.
Quick chart (″ per pixel)
| Focal length | 2.4 µm | 2.9 µm | 3.76 µm | 4.63 µm |
|---|---|---|---|---|
| 250 mm | 1.98 | 2.39 | 3.1 | 3.82 |
| 400 mm | 1.24 | 1.5 | 1.94 | 2.39 |
| 650 mm | 0.76 | 0.92 | 1.19 | 1.47 |
| 1000 mm | 0.5 | 0.6 | 0.78 | 0.96 |
| 1200 mm | 0.41 | 0.5 | 0.65 | 0.8 |
| 2032 mm | 0.24 | 0.29 | 0.38 | 0.47 |
Sampling, simply
Stars in long exposures are blurred by the air to a few arcseconds across. If each star covers only one or two pixels it looks blocky (undersampled); if it spreads over many, extra resolution is wasted and signal per pixel drops (oversampled). A common target is two to three pixels across the typical star blur.
For the Moon and planets, imagers use short video frames and stack the sharpest, so finer sampling pays: a focal ratio of about 5 × the pixel size in µm (for example f/19 for 3.76 µm) is a common starting point.
Questions people ask
How do I calculate arcseconds per pixel?
206.265 × pixel size (µm) ÷ focal length (mm). A 3.76 µm camera on a 1,000 mm telescope gives about 0.78″ per pixel.
What image scale should I aim for?
For deep-sky imaging in average seeing (2–3″), about 0.7–2″ per pixel is comfortable. Planetary imaging uses much finer scales, often with a Barlow at about f/(5 × pixel size).
How do I work out my camera's field of view on a telescope?
Sensor width (mm) ÷ focal length (mm) × 57.3 gives degrees. Sensor width = pixels × pixel size ÷ 1000.
Does a focal reducer change image scale?
Yes. A 0.63× reducer shortens the effective focal length, giving 1.59× more arcseconds per pixel and a wider field.
Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.