FocalFit › Which eyepieces should I buy for my telescope?
Which eyepieces should I buy for my telescope?
Choose eyepieces by exit pupil, not by magnification. Multiply your focal ratio by the exit pupil you want: about 5 mm for low power, 2.5 mm for medium, 1.2 mm for high and 0.7 mm for planets on steady nights. In an f/6 telescope that is roughly 30, 15, 7 and 4–6 mm. The planner below does this for your scope, snaps to focal lengths you can actually buy, and stops at the power the air and aperture can support.
Why exit pupil works
Exit pupil (aperture ÷ magnification, or eyepiece focal length ÷ focal ratio) predicts what a view will look like in any telescope. A 2 mm exit pupil looks about equally bright in a 70 mm or a 250 mm scope; the bigger scope just shows it at higher power.
That makes one rule work for every telescope: eyepiece focal length = focal ratio × exit pupil.
| Exit pupil | Typical use |
|---|---|
| 5–7 mm | Widest views, nebulae under dark skies |
| 3–4 mm | Big clusters, galaxies |
| 2–2.5 mm | Smaller deep-sky objects, whole Moon |
| 1–1.3 mm | Moon, planets most nights |
| 0.6–0.8 mm | Planets and close doubles, steady air |
Example sets for common telescopes
Average seeing, 1.25-inch eyepieces. These come straight from the planner; your exact focal lengths can shift a millimetre or two either way.
| Telescope | Suggested set |
|---|---|
| 70 mm f/10 refractor | 32 mm (22×), 20 mm (35×), 12 mm (58×), 7 mm (100×) |
| 130 mm f/5 reflector | 25 mm (26×), 12.5 mm (52×), 6 mm (108×), 3.5 mm (186×) |
| 127 mm f/12 Maksutov | 32 mm (47×), 20 mm (75×), 14 mm (107×), 8 mm (188×) |
| 150 mm f/8 Dobsonian | 32 mm (38×), 20 mm (60×), 9 mm (133×), 6 mm (200×) |
| 200 mm f/6 Dobsonian | 30 mm (40×), 15 mm (80×), 7 mm (171×), 6 mm (200×) |
| 203 mm f/10 Schmidt-Cassegrain | 32 mm (64×), 20 mm (102×), 12 mm (169×), 10 mm (203×) |
| 254 mm f/4.9 Dobsonian | 25 mm (50×), 12.5 mm (100×), 6 mm (208×) |
Avoid these common mistakes
- Buying the highest power first. A 4 mm in a 1,200 mm scope (300×) is usable only a handful of nights a year. A 7–8 mm sees far more use.
- Steps that are too small. 25 mm to 20 mm is only a 1.25× change; the view barely differs. Aim for about 1.5× between neighbours.
- Barlow duplicates. Write down every power you can reach with and without the Barlow before buying.
- Ignoring eye relief. If you observe in glasses, short Plössls (under about 10 mm) have uncomfortably little eye relief; look for 15–20 mm eye relief designs.
Questions people ask
How many eyepieces do I need?
Three covers almost everything: a low-power finder (4–6 mm exit pupil), a medium (2–3 mm) and a high-power planetary eyepiece (about 1 mm). A fourth for steady nights, or a good 2× Barlow, completes the set.
Should I buy a Barlow or more eyepieces?
A Barlow is good value if its doubled powers fill gaps instead of duplicating eyepieces you already own. A 25 mm and 12.5 mm pair with a 2× Barlow is wasted: the Barlowed 25 mm equals the 12.5 mm.
Are the eyepieces that came with my telescope any good?
The 25 mm or 20 mm supplied with most scopes is usually adequate. Very short ones marked H, SR or Huygens (for example SR4 or H6) on budget scopes are often poor, and a 3× Barlow on top makes things worse.
Do I need 2-inch eyepieces?
Only for the widest low-power fields. A 1.25-inch eyepiece's field stop tops out around 27 mm, which limits the widest true field. In a 1,200 mm scope that is about 1.3°; a 2-inch eyepiece can reach about 2.2°.
Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.