FocalFit › Barlow lens magnification calculator

Barlow lens magnification calculator

A Barlow multiplies the magnification of every eyepiece by its factor. With a 2× Barlow a 25 mm eyepiece in a 900 mm telescope goes from 36× to 72×, its exit pupil halves, and its true field halves. It is a cheap way to double a collection, as long as the doubled powers do not copy eyepieces you already own.

Eyepiece and telescope calculator

Printed on the tube, e.g. “FL 1200 mm”.

Diameter of the main lens or mirror.

The number on the eyepiece barrel.

Plössl ≈ 50–52°, wide ≈ 68–82°.

More exact true field if the maker lists it.

About 7 mm young, 5–6 mm over 50.

Plan your powers before you buy

List every eyepiece with and without the Barlow. A tidy set interleaves: 32 / 20 / 13 mm plus a 2× Barlow gives six powers in roughly 1.5× steps (32, 20, 16, 13, 10, 6.5 mm equivalents).

A messy set duplicates: 25 / 12.5 mm plus a 2× gives 25, 12.5, 12.5 and 6.25 mm equivalents — only three distinct powers.

Use the calculator to try the Barlow on each eyepiece in turn.

Advertisement
Ad space

With and without a 2× Barlow (900 mm, 114 mm telescope)

EyepieceBarlowMagnificationExit pupilTrue field (52°)
25 mmnone36×3.17 mm87′
25 mm2×72×1.58 mm43′
10 mmnone90×1.27 mm35′
10 mm2×180×0.63 mm17′
6 mmnone150×0.76 mm21′
6 mm2×300×0.38 mm10′

The 6 mm in a 2× Barlow (300×) is far past this 114 mm telescope's 228× ceiling. That combination is a common way a beginner's first night goes wrong.

Good uses for a Barlow

Questions people ask

What does a 2× Barlow do?

It doubles the telescope's effective focal length, so every eyepiece gives twice the magnification and half the exit pupil. A 20 mm eyepiece behaves like a 10 mm.

Does a Barlow change the field of view?

Yes, it halves the true field (for a 2×), because the magnification doubles. The apparent field you see through the eyepiece stays the same.

Is a 3× Barlow better than a 2×?

Only if your eyepieces are long. In fast scopes with long eyepieces, a 3× can fill a gap; in slow scopes it usually pushes past useful power. Check the result with the calculator.

Does the Barlow factor change with distance?

Yes. Putting extra length (a diagonal or extension) between the Barlow lens and the eyepiece raises the factor. A 2× Barlow used ahead of a star diagonal can act as about 3×.

Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.