FocalFit › Best eyepieces for an 8-inch Schmidt-Cassegrain (2,032 mm, f/10)
Best eyepieces for an 8-inch Schmidt-Cassegrain (2,032 mm, f/10)
An 8-inch f/10 Schmidt-Cassegrain gives high power with long eyepieces: a 25 mm already gives 81×, and a 10 mm is a planetary eyepiece. A balanced set for this 2032 mm f/10 telescope is 40 mm (51×), 25 mm (81×), 12 mm (169×), 10 mm (203×): low power for finding, medium for deep sky, high for the Moon and planets. Its useful range runs from about 29× to 406×, and on most nights the air stops it around 200×.
Best eyepiece by target
| Target | Eyepiece | Power |
|---|---|---|
| The Moon | 15 mm | 135× |
| Jupiter | 10 mm | 203× |
| Saturn | 10 mm | 203× |
| Mars | 10 mm | 203× |
| Galaxies and nebulae | 40 mm | 51× |
| Star clusters | 20 mm | 102× |
The numbers for this scope
| Spec | Value |
|---|---|
| Aperture | 203 mm (8 in) |
| Focal length | 2032 mm |
| Focal ratio | f/10 |
| Resolution (Dawes) | 0.57″ |
| Faintest stars, dark sky | about mag 14.2 |
| Widest field, 1.25-inch | 0.76° |
| Widest field, 2-inch | 1.3° |
Every common eyepiece in this telescope
| Eyepiece | Magnification | Exit pupil | True field (52° eyepiece) | Good for |
|---|---|---|---|---|
| 40 mm | 51× | 4 mm | 1.02° | Clusters, galaxies, the whole Moon |
| 32 mm | 64× | 3.2 mm | 49′ | Clusters, galaxies, the whole Moon |
| 25 mm | 81× | 2.5 mm | 38′ | Clusters, galaxies, the whole Moon |
| 20 mm | 102× | 2 mm | 31′ | Moon detail, planets on most nights |
| 15 mm | 135× | 1.5 mm | 23′ | Moon detail, planets on most nights |
| 12 mm | 169× | 1.2 mm | 18′ | Moon detail, planets on most nights |
| 10 mm | 203× | 1 mm | 15′ | Planets and doubles on steady nights |
| 8 mm | 254× | 0.8 mm | 12′ | Planets and doubles on steady nights |
| 6 mm | 339× | 0.6 mm | 9′ | Rarely useful (very dim, floaters) |
| 5 mm | 406× | 0.5 mm | 8′ | Too much for this aperture |
| 4 mm | 508× | 0.4 mm | 6′ | Too much for this aperture |
Tips for this telescope
- Low power is the hard part: a 1.25-inch 32 mm gives 64× and about 0.76°. A 2-inch diagonal with a 2-inch 40 mm reaches about 1.3°.
- A 0.63× focal reducer turns the scope into about f/6.3 (1,280 mm), widening every eyepiece's field by about 60 per cent.
- Planets: 10–12 mm (169–203×) on most nights.
- Short eyepieces (under 7 mm) are rarely needed: 290× and above is past what the air usually allows.
- Check collimation on a star at high power occasionally; SCTs drift out over time.
Questions people ask
What eyepieces should I get for an 8 inch SCT?
A 2-inch 40 mm (51×) or 1.25-inch 32 mm (64×) for the widest view, a 25 mm (81×) or 20 mm (102×), a 12 mm (169×) and a 10 mm (203×). Short eyepieces are seldom needed.
How do I get a wider field in a Schmidt-Cassegrain?
Use a 2-inch diagonal and a 2-inch long-focus eyepiece, or a 0.63× reducer. Together they can reach about 2°.
What is the max magnification of an 8 inch SCT?
About 400× in theory; 200–300× in practice.
Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.