FocalFit › Maximum useful magnification by aperture

Maximum useful magnification by aperture

About 2× the aperture in millimetres (50× per inch). A 70 mm telescope tops out near 140×, a 130 mm near 260× and a 200 mm near 400×. In practice the atmosphere stops most nights at about 150–250×, so big telescopes rarely reach their theoretical maximum.

What can this aperture do?

Diameter of the main lens or mirror.

Rules of thumb

  • Minimum: aperture ÷ 7 (or ÷ your pupil).
  • Planet sweet spot: aperture ÷ 1 to aperture ÷ 0.7 (1–0.7 mm exit pupil).
  • Maximum: aperture × 2.
  • Typical night ceiling: about 200×.

For a target-specific answer, try the planet magnification calculator.

Advertisement
Ad space

Chart

ApertureInchesMinimum (7 mm pupil)Planet sweet spotMaximum useful
50 mm27×50–71×100×
60 mm2.49×60–86×120×
70 mm2.810×70–100×140×
80 mm3.111×80–114×160×
90 mm3.513×90–129×180×
102 mm415×102–146×204×
114 mm4.516×114–163×228×
127 mm518×127–181×254×
130 mm5.119×130–186×260×
150 mm5.921×150–214×300×
200 mm7.929×200–286×400×
254 mm1036×254–363×508×
305 mm1244×305–436×610×
356 mm1451×356–509×712×
406 mm1658×406–580×812×

Seeing decides most nights

SeeingSignsPractical ceiling
PoorStars twinkle strongly, planets boilabout 120×
AverageSome twinkle; planet detail comes and goesabout 200×
GoodLittle twinkle; moments of sharp detailabout 300×
ExcellentStars barely twinkle; steady discs400× and up

A telescope that has not cooled to air temperature, or one pointed over a warm roof, adds its own turbulence. Give larger mirrors 30–60 minutes outside before judging the seeing.

Questions people ask

What is the maximum useful magnification of a telescope?

About twice the aperture in millimetres, or 50× per inch: 120× for 60 mm, 140× for 70 mm, 260× for 130 mm, 400× for 200 mm. Under real skies most scopes over 150 mm are limited by the air instead, at around 200–300×.

What is the minimum useful magnification?

Aperture ÷ your pupil. With a 7 mm pupil, a 200 mm telescope's minimum is about 29×; below that the exit pupil is bigger than your eye and some light is lost.

Why is the air the limit?

Turbulence in the atmosphere (seeing) blurs fine detail. On an average night detail stops improving around 150–200×, whatever the telescope. Only steady nights allow 300× or more.

Can I go above 2× aperture?

You can, for splitting very close double stars on perfect nights, but the image gets dim and no new detail appears. For planets it almost never helps.

Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.