FocalFit › Best eyepiece for viewing the Moon

Best eyepiece for viewing the Moon

Use one eyepiece to fit the whole Moon and one for close-ups. The Moon is about 31 arcminutes wide, so you need a true field of at least about 0.6° to frame it. In a 1,200 mm telescope that is a 14 mm (52°) or longer; for crater detail, 6–8 mm (150–200×) on a steady night.

True field of view calculator

Printed on the tube, e.g. “FL 1200 mm”.

Overrides the apparent-field estimate.

Shortest eyepiece that fits the whole Moon

Telescope FL52° eyepiece68° eyepiece82° eyepiece
400 mm4.6 mm3.5 mm2.9 mm
650 mm7.5 mm5.7 mm4.8 mm
700 mm8.1 mm6.2 mm5.1 mm
900 mm10.4 mm7.9 mm6.6 mm
1200 mm13.8 mm10.6 mm8.8 mm
1500 mm17.3 mm13.2 mm11 mm
2032 mm23.4 mm17.9 mm14.9 mm

Gives a 0.6° field: the Moon with a small margin of sky.

Advertisement
Ad space

Close-up powers

TelescopeClose-up eyepiecePower
70 mm f/107–8 mm88–100×
130 mm f/55–6 mm108–130×
150 mm f/87–8 mm150–171×
200 mm f/66–7 mm171–200×
203 mm f/10 SCT10–12 mm169–203×

The Moon is the target that tolerates high power best because it is so bright. On steady nights 250× and above can show rilles and tiny craterlets in 200 mm and larger scopes.

Questions people ask

What eyepiece is best for viewing the Moon?

Two: a low-power one that fits the whole disc (true field above about 0.6°) and a high-power one around 120–200× for craters along the terminator. In a 1,200 mm scope that is roughly a 25 mm and a 6–8 mm.

Do I need a Moon filter?

No, it is not needed for safety. The Moon is bright but harmless. A neutral-density or polarising filter just makes a full Moon more comfortable in large telescopes.

What is the best time to observe the Moon?

Not at full Moon. Around first and last quarter the sunlight strikes the terminator at a low angle, and craters cast long shadows that show depth.

How much magnification to see the Apollo landing sites?

You can see where they are at 100× or so, but no telescope on Earth can show the hardware left behind; it is far below any telescope's resolution.

Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.