FocalFit › How to calculate telescope magnification

How to calculate telescope magnification

Divide the telescope's focal length by the eyepiece's focal length. 900 mm ÷ 25 mm = 36×; 900 mm ÷ 10 mm = 90×. Add a 2× Barlow and multiply by 2 (72× and 180×). Then check the result against the useful ceiling of about 2× the aperture in millimetres.

Eyepiece and telescope calculator

Printed on the tube, e.g. “FL 1200 mm”.

Diameter of the main lens or mirror.

The number on the eyepiece barrel.

Plössl ≈ 50–52°, wide ≈ 68–82°.

More exact true field if the maker lists it.

About 7 mm young, 5–6 mm over 50.

The formula

M = Ftelescope ÷ feyepiece × Barlow

Example 1. 700 mm refractor, 20 mm eyepiece: 700 ÷ 20 = 35×.

Example 2. Same scope, 10 mm eyepiece in a 2× Barlow: 700 ÷ 10 × 2 = 140×. That is exactly the 2 × 70 mm ceiling, so it is the most this scope should be pushed.

Example 3. 2,032 mm Schmidt-Cassegrain, 40 mm eyepiece: 2032 ÷ 40 = 51×. Long-focus scopes give high power even with long eyepieces, which is why their widest field is limited.

Advertisement
Ad space

Magnification chart

Telescope focal length down the side, eyepiece across the top.

Telescope FL32 mm25 mm20 mm15 mm10 mm6 mm4 mm
400 mm13×16×20×27×40×67×100×
650 mm20×26×33×43×65×108×163×
700 mm22×28×35×47×70×117×175×
900 mm28×36×45×60×90×150×225×
1000 mm31×40×50×67×100×167×250×
1200 mm38×48×60×80×120×200×300×
1500 mm47×60×75×100×150×250×375×
2032 mm64×81×102×135×203×339×508×

Working backwards: which eyepiece gives a set power?

eyepiece focal length = telescope focal length ÷ magnification wanted

Want 150× from a 1,200 mm Dobsonian? 1200 ÷ 150 = 8 mm. Want 100× from a 650 mm reflector? 650 ÷ 100 = 6.5 mm, so a 6 mm (108×) or 7 mm (93×).

When the number lies

Magnification is only half the story. The same 120× looks bright and crisp in a 200 mm scope (1.7 mm exit pupil) and dim and mushy in a 60 mm scope (0.5 mm). Use the exit pupil and maximum useful magnification pages to judge whether a power is worth using.

Questions people ask

What is the formula for telescope magnification?

Magnification = telescope focal length ÷ eyepiece focal length. Multiply by the Barlow factor if you use one.

Does aperture change magnification?

No. Aperture sets how much light is collected and how much detail can be resolved, which limits how much magnification is useful, but the magnification itself comes only from the two focal lengths.

What magnification is a 25 mm eyepiece?

It depends on the telescope. In a 650 mm scope it gives 26×, in 900 mm 36×, in 1,200 mm 48× and in a 2,032 mm Schmidt-Cassegrain 81×.

Why does my telescope box say 525× or 675×?

That is the theoretical maximum with the smallest eyepiece and a Barlow. It is not usable. A 70 mm or 76 mm telescope tops out around 140–150×, and the air usually limits everything to about 200×.

Formulas: magnification = telescope focal length ÷ eyepiece focal length; exit pupil = aperture ÷ magnification; true field = field stop ÷ focal length (in radians) or, approximately, apparent field ÷ magnification; Dawes limit = 116 ÷ aperture in mm (arcseconds). Limiting magnitude uses the common rule of thumb 2.7 + 5·log₁₀(aperture in mm) for an experienced observer under a dark sky. Planet sizes are typical yearly ranges from published ephemerides.